Dynacord COBRA-4-FAR (F01U100691) Monitor de scena

Dynacord COBRA-4-FAR (F01U100691) Monitor de scena

Acest produs nu este comercializat de nici unul dintre partenerii noştri. Vă rugăm să alegeți din produsele de mai jos.

Puteti evalua

Descrierea produsului
Descriere DYNACORD´s COBRA-4-FAR is an active 3-Way cabinet for use as a farfield cabinet in compact line arrays and other demanding applications, where wide horizontal coverage, extremely low distortion and a low sensitivity against acoustic feedback are mandatory. Depending on the application, the COBRA-4-FAR cabinet can be used up to 80m throw distance. For the high frequencies of the COBRA-4-FAR, three Electro- Voice DH2T titanium diaphragm drivers are connected to a low-resonance waveguide that creates a coherent isophasic wavefront with a precisely defined vertical dispersion angle of 5° at 10kHz. Stacking of COBRA-4-FAR cabinets automatically increases the height of the isophasic wavefront due to the mechanical design of the low-resonance waveguide. The mid-range of the COBRA-4-FAR uses selected DYNACORD C8 cone transducers in a line array configuration. The C8 transducers show significantly lower distortion than typical horn/compression driver combinations. Therefore an extremely natural sound quality over large distances can be achieved. The DYNACORD COBRA-4-FAR uses a vented direct-radiator design equipped with an Electro-Voice EVX155 for the low frequencies. The cabinet is equipped with an electronic circuit called VOICE COIL TRACKING PROTECTION. This circuit senses the terminal voltage of the transducers and simulates the thermal behaviour of the transducer voice coils. In case of potential thermal overload the power applied to the speakers is reduced to a safe level. Power amps up to 1200W/8Ohms can be used in order to have maximum dynamic range without the danger of thermal overload in non-controlled situations. The VOICE COIL TRACKING PROTECTION exhibits "soft" switching characteristics, so no annoying clicks or pops are audible. The circuitry automatically resets after the voice coil temperatures have reached a safe value. Specificatii tehnice
Cabinet MID - HIGH Cabinet

Configuration Compact line array / active 3-way

Nominal impedance: LOW - MID - HIGH 8 Ohms - 8 Ohms - 8 Ohms

Rated power RMS: LOW - MID - HIGH 400 W - 200 W - 200 W

Program power: LOW - MID - HIGH 800 W - 400 W - 400 W

SPL 2,83 V / 1m 1 W / 8 Ohm 100 dB

Max. SPL 1m (calculated) 131 dB

Frequency response ( -10dB ) 90Hz - 17kHz

Coverage angle 1 kHz (-6dB) H 120° x V 30°

Coverage angle 10kHz (-6dB) H 90° x V 5°

Active crossover frequency 124Hz - 700Hz - 4kHz

Voice coil tracking protection LOW - MID - HIGH

Components HIGH DH 2T Line array

Components MID C8 Line array

Components LOW EVX155

Connector wiring HIGH 8-pole 4+/4-

Connector wiring MID 8-pole 3+/3-

Connector wiring LOW 8-pole 2+/2-

Connector model Speakon 2x NL8 MPR

Dimensions (WxHxD) mm 600 x 495 x 717

Shipping weight 67 kg

Net weight 63.5 kg

Enclosure material Birch plywood 18mm

Finish Black polyurethane

Grille Powder coated steel

Handles 2

Ancra Tracks 4

Webbing strap point 2

Front cover 1

Castors 4



Denumiri similare la Monitor de scena Dynacord COBRA-4-FAR (F01U100691): COBRA 4 FAR F 01 U 100691, COBRA4FARF01U100691, COBRA 4 FAR (F01U100691), COBRA-4-FARF01U100691, COBRA 4-FAR (F01U100691), COBRA-4-FAR (F01U 100691)


Galerie

Păreri

Prețurile și informațiile de pe paginile noastre sunt furnizate de magazinele partenere și au caracter informativ, unele erori pot apărea. Imaginile produselor au caracter informativ, uneori pot include niște accesorii care nu sunt mereu incluse în pachetul de baza. Informațiile aferente produsului (imagine, descriere, preț) se pot schimba fără notificare prealabilă. Compari.ro nu își asumă responsabilitate pentru eventualele greșeli.